CO2 & N2 Valves & Regulators
Return to Regulating Valves: Page 1| Page 2 | Page 3

Regulators that accept 5/8”- 18 threaded CO2 cartridges.
May also be adapted for 3/8”-24UNF threaded cylinders by means of a #50037 bushing, which reduces the inlet size.
#50033
Regulator,
Gas Pressure Control
Threaded 5/8”-18 inlet
1 to 55 psi Outlet Pressure
Gauge reads in psi
#50034
Regulator,
Gas Pressure Control
Threaded 5/8”-18 inlet
7.0 to 21 psi Outlet Pressure
Gauge reads in psi

Choose the 50034 model if you just want to ‘push’ a liquid. If you need to carbonate, then you’ll need to apply more than 25psi. Control the gas with confidence. These are extremely durable devices designed to properly handle CO2, which has a pressure of 838 psi at 70F.

Disposable type gas cartridges with 3/8” and 5/8” threaded necks range in size from 8 to 74 grams of CO2. They are welded closed, which assures you of zero leakage. Any CO2 regulator must be used in an upright position or liquid CO2 will ‘foul’ the regulator.

All stainless, brass, and aluminum construction set the standard for durability.
Urethane seals and conical shaped puncture pins assure minimal leakage over time. (About .03 gr/mo. CO
2 leakage has been observed in the worst case.)